Thapar Institute of Engineering and Technology (Deemed University) - Year 2012-13 (Non-Referred)

 List of Non-Referred Journal Papers (2012-13)

S. No. Title of the paper Name of the Journal with volume, page nos., year Name of the authors

1.

Experimental valuation on the single cylinder, 4-stroke CI engine using hemp oil and its respective blends for the analysis of performance and emission characteristics

IJES, 16(1), , pp 17-21, July 2012

Ragit, S., Mohapatra, S. K., Kundu, K.

2.

Effect of addition of fly ash and drag Reducing on the rheological properties of bottom ash’

International Journal of Mechanical and Materials Engineering (IJMME), vol 8, No. 1, 1-8, (2013)

 

Kumar, S., Mohapatra, S. K., Gandhi, B. K.,

3.

Performance and emission study of Indian brown hemp oil, methyl ester in a 4-stroke single cylinder water cooled diesel engine

 International Journal of Engineering Research and Technology, ISSN: 0974-3154, 6, 5, pp 15-19, March 2013.

Ragit S. S., Mohapatra, S. K., Kundu, K., and Patil, GJV

4.

Methanolysis and ethanolysis of raw hemp oil; biodiesel production and fuel characterization

International Journal of Engineering Research and Technology, ISSN: 2278-0181, 2, 3, pp 1-10, March 2013.

 

Ragit S. S., Mohapatra, S. K., Kundu, K., and Karmakar, R.,

5.

Optimization of Pongamia methyl ester from trans-estrification process and fuel characterization as a diesel substitute

Zenith International Journal of Multidisciplinary Research, ISSN 2231-5780, 3 (6), pp 130-140, June (2013).

 

Prasad V.S., Mohapatra, S. K., Kundu, K.

6.

Diagnostics for pretesting questionnaires: a

comparative analysis

Int. Journal of Technology, Policy and Management, Vol. 13, pp.67-79, 2013.

Tarun Nanda, Himanshu Gupta, Manjeet Kharub

and Navdeep Singh

7

A new method to design cam used in automobile heating, ventilating and cooling system

Journal of the Institution of Engineers (India), Series C; (Springer Publication), Vol. 93 (4), pp. 275-286, Oct.-Dec., 2012.

Baljeet Singh, Daljeet Singh,          J. S. Saini

8

Dynamic Analysis of Condenser Assembly of Automobile Air Conditioning System using CAE Tools

Journal of the Institution of Engineers (India), Series C; (Springer Publication), Vol. 94 (2), pp. 135-145,

April-June, 2013.

 

Manjeet Singh, Daljeet Singh,           J. S. Saini

9

Effect of cetylpyridinium chloride, triton X-100 and sodium dodecylsulphate on rheology of fly ash

International Journal of Scientific and Research Publication (IJSRP), vol. 2, no. 8, pp. 1-5, Aug. 2012 (Online ISSN 2250-3153)

Singh, K. & Kundan, L.

10

A review of the thermal conductivity of Al2O3-H2O, EG based nanofluids

GGGI Journal of Engineering and Technology, vol. 1, no. 2, pp. 45-51, 2012. (ISSN:2278-1226)

Lal Kundan and Mallick S.S.

11

Thermal performance evaluation of a direct absorption flat plate solar collector (DASC) using Al2O3-H2O based nanofluids

IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), vol. 6, no. 2, pp. 29-35, 2013. (ISSN: 2278-1684))

Verma, V. & Kundan, L.

12

Performance evaluation of a nanofluid (CuO-H2O) based low flux solar collector

International Journal of Engineering Research (IJER)’, vol. 2, issue 2, pp. 108-112, 2013. (ISSN: 2319-6890)

Kundan, L & P Sharma

13

An experimental investigation of the viscous behavior of Al2O3 based nanorefrigerant

International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME), vol. 2, issue 3, pp. 143-147, 2013. (ISSN: 2319 – 3182)

Singh, G & Kundan, L.

14

An experimental study on thermal conductivity and viscosity of Al2O3 / Nano Transformer Oil

International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME), vol. 2, issue 3, pp. 125-130, 2013. (ISSN: 2319 – 3182)

Singh M.& Kundan L

15

Drop test analysis of impact attenuator for formula

SAE car

International Journal of Scientific and Research Publications, Volume 2, Issue 10, October 2012.

Devender Kumar, Sachin Kumar, Gagandeep Singh, Naman Khanna

16

A new method to design cam used in automobile heating, ventilating and cooling system

Journal of The Institution of Engineers (India): Series C, vol. 93, no. 4, pp. 275–286, 2012.

B.Singh,

D.Singh,

J.S.Saini

17

Dynamic analysis of condenser assembly

of automobile air conditioning system

using CAE tools

Journal of The Institution of Engineers (India): Series C

Volume 94,

Number 02, 135-145, 2013.

 

M.Singh,

D.Singh,

J.S.Saini

18

Investigation on centrifugal slurry pump performance with variation of operating speed

International Journal of Mechanical and Materials Engineering, vol. 8 , no. 1, pp.40-47, 2012.

 Kumar Satish ,Mohapatra, S. K., and Gandhi,B.K

19

Defect detection in plated structures using ultrasonic guided waves

Journal of Pure and Applied Ultrasonics, 34 (2-3), pp. 53-59.

Sandeep K Sharma

Dr. Abhijit Mukherjee

20

Metallographic analysis of pure titanium (grade-2)

surface by wire electro discharge machining

(WEDM)

Journal of Machinery Manufacturing and Automation, vol.2,Issue1, pp. 1-5,

World Academic Publishing CO., Ltd, 2013.

Anish kumar

Vinod kumar

Jatinder kumar

21

Optimization and modelling of process parameters involved in ultrasonic machining of glass using design of experiments and regression approach

American Journal of Materials Engineering and Technology, 2013, vol. 1, no. 1, pp. 13-18, Science and Education Publishing DOI:10.12691/materials-1-1-3

Vinod kumar

 

22

Effect of machining parameters on dimensional deviation in Wire Electric Discharge Machining process using pure titanium

Journal of Engineering and Technology, vol.3, Issue 2, pp. 105-112,  2013

Anish kumar

Vinod kumar

Jatinder kumar.

23

Predictor equations for estimating crater dimensions in PMEDM process using FEM simulation and experimental validation

Materials Science Forum, (Special Issue on: Recent Advances in Manufacturing Processes), vol.  751, pp. 45-60, March 2013.

 DOI: 10.4028/www.scientific.net/MSF.751.45

Anirban Bhattacharya, Ajay Batish

24

Optimizing the compression ratio of compression ignition engine fuelled with Esters of crude rice bran oil

 

International Journal on Theoretical And Applied Research In Mechanical Engineering (IJATERME,  ISSN : 2319 – 3182, Volume-2, Issue-3, 2013

 

Mohit Vasudeva1, Sumeet Sharma2, S.K. Mohapatra3 & KrishnenduKundu

25

Characterization of Biodiesel

derived from waste cotton

seed oil and waste mustard oil

International Journal Of Engineering Science And Technology (IJEST), vol. 5, no.07, pp. 1443-48, July 2013. (ISSN : 0975-5462)

 

Sandeep Singha,, Sumeet Sharmaa, S.K. Mohapatraa & K. Kundu