Thapar Institute of Engineering and Technology University - Conference Papers (2013-14)

 List of Conference Papers (2013-14)

S. No. Title of the paper Name of conference with venue, date and year, page nos. Name of the authors

1.     

Effect of addition of fly ash on the rheological properties of bottom ash slurry at varying temperature

Proc. International Conference on PGBSIA, November 28-31, 2013, Thapar University, Patiala, pp 388-393.

Kumar S., Mohapatra, S. K., and Gandhi B. K

2.   

Performance and emission characteristics of a C.I. engine fuelled with different blends of biodiesel derived from waste mustard oil

Proc. of Intl. conf. on Advances in Mechanical Engineering, AETAME, NOIDA, Dec 13-14, 2013.

Bhardwaj V., Sharma S., Mohapatra, S. K., and Kundu, K

3.   

Numerical Simulation of Solid liquid two phase Flow behaviour in Centrifugal slurry Pump

International conference on Powder, Granule and Bulk Solids: Innovations and applications, Thapar University, Patiala, India, 1,170-175.

Kumar Satish, Gandhi, B.K., and Mohapatra, S. K. 

4.   

Scallop Height of 5-axis Machining of Large Triangles with a Flat End Mill

Annual International CAD conference, CAD’14, Hong Kong, 23to 26 June, 2014

Ravinder Kumar Duvedi,  Ajay Batish, Sanjeev Bedi,  Stephen Mann

5.   

Analysis and Control of Semi Active Suspension System for a Bicycle vehicle model: A Bond Graph Approach

Second International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM), IIT Indore, December 2013; pp. 168–173.

Bera, T. K. and Singh, J.

6.   

Bond graph aided performance analysis of antilock braking system for a bicycle vehicle model with camber angle and fork angle

International Conference on Machines and Mechanisms (iNaCoMM 2013), IIT Roorkee, December 2013; pp 70–76.

Bera, T. K. and Singh, A.

7.   

A novel ball end magnetorheological finishing process

ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, November 14-20, 2014, Montreal, Canada.

Anant Kumar Singh, Sunil Jha, P.M. Pandey

8.   

Effect of dispersion parameters on thermal conductivity of alumina and copper oxide nanofluid,

“International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA 2013")”, Nov. 28-30, 2013. (Poster Presentation)

Kundan L & Mallick SS

9.   

Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM

Proceedings of International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA), Mechanical Engineering Department, Thapar University Patiala – 147004, Punjab

November 28-30, 2013,

pp. 370 – 376.

Ajay Batish, Anirban Bhattacharya, Naveen Kumar

10.   

Experimental Investigation of Magnetic field assisted Powder Mixed Electric Discharge Machining

Proceedings of International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA), Mech. Engg Dept., TU Patiala, November 28-30, 2013, pp. 344 – 350

Geeta Bhatt, Anirban Bhattacharya, Ajay Batish

11.   

Taguchi method approach for determining the effect of process variables on properties of epoxy nanocomposites

International conference on advanced polymeric materials, October 11-13, 2013, Kottayam, 95

Bikramjit Sharma, Rahul Chhibber, Rajeev Mehta

12.   

Composite Cladding on Mild Steel Substrate using Microwave Hybrid Heating

The International Conference on Smart Technologies for Mechanical Engineering (STME-2013), DTU, Delhi, 731-735. 2013

Dheeraj Gupta, Deepika Naudiyal

13.   

Simulation of single slope solar still at different inclinations using CFD

International conference of advance research innovation (ICARI- 2014) Venue: Institution of Engineers  Delhi State Center, Engineers Bavan 2, Bahadur Shah Zafar Marg, New Delhi            Date & Year: February 1st 2014,      Page no: 512-519.

Amrik Singh, M. K. Mittal

14.   

Tool Path Generation for Free Form Surfaces using B-Spline Surface

International Conference on Research and Innovations in Mechanical Engineering, Guru Nanak Dev Engineering College, Ludhiana, Punjab, Oct., 24-26th, 2013

Simranpreet S. Randhawa,

J. S. Saini

15.   

Effect of Clay Reinforcement on the Properties of Epoxy based Polymer Matrix Nanocomposites

Proceeding of the International Conference on Emerging Trends in Engineering and Management, November 8-9, 2013, MED, CIET, Jalvehra, Fatehgarh Sahib.

Karanbir Singh and Tarun Nanda

16.   

Effect of Alloying and Heat Treatment on the Properties of Super Martensitic Stainless Steels

Proceeding of the International Conference on Emerging Trends in Engineering and Management, November 8-9, 2013, MED, CIET, Jalvehra, Fatehgarh Sahib.

Surinder Singh and Tarun Nanda

17.   

D-H Parameters Augmented with Dummy Frames for Serial Manipulators containing Spatial Links

The 23rd IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN 2014), August 25-29, 2014, Edinburg, Scotland, UK (Accepted)

Amanpreet Singh, Ashish Singla and Sanjeev Soni

18.   

High Index Norm Approach: A Redundancy Resolution Scheme For Inverse Kinematics of Redundant Serial Manipulators

Proceedings of 6th International IEEE Conference on Robotics and Mechatronics (ROBMECH-2013), pp. 40-45, Oct 30-31, 2013, Durban South Africa

 

Ashish Singla

 

19.   

Vibration Suppression of a Cart-Flexible Pole System Using a Hybrid Controller

Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), pp. 375-382, Dec 18-20, 2013, IIT Roorkee, India

Ashish Singla

 

20.   

An investigation into the stability and thermal conductivity of silver/water nanofluids

International Conference on Powder, Granule and Bulk Solids: Innovations and Applications, November 28-30, 2013, Thapar University, pp 271-276

Apoorva Singh, B.Pal and S.S. Mallick

21.   

Evolution of Scale-Up Procedures for Dense-Phase Pneumatic Conveying of Powders

 

15thInternational Freight Pipeline Society Symposium 2014, Czech Association of Scientific and Technical Societies (CSVTS), Novotného lávka 5, Praha 1, Czech Republic, 24 June - 26 June 2014

P.W. Wypych, S.S. Mallick, R. Pan

22.   

A Comparative study of  various methods for identification of isomorphism in kinematic chains

Ist international and 16th National Conference on machines and mechanisms (iNaCoMM 2013) IIT Roorkee. pp 582-589

Rashmi Arora & S.P. Nigam