Thapar Institute of Engineering and Technology University - Conference Papers (2011-12)

 List of Conference Papers (2011-12)

S. No. Title of the paper Name of conference with venue, date and year, page nos. Name of the authors

1.     

A comparative analysis on the performance and emission characteristics using raw hemp oil and filtered neem oil in Diesel engine

FTME-2010, GNE Ludhiana, 1, 70-74, 2010

Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V

 

 

2.        

Experimental investigations of performance and emission of hemp biodiesel and its blend with diesel

FTIME-2010, GITM Yamunanagar, 1, 235-241, 2010

 

Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V

3.        

Optimisation of Mahua biodiesel by different production technique

Advances in Chemical Engineering, Thapar University, 1, 166-171, 2011

Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V

4.        

Performance and emission characteristics of a Diesel engine fuelled with hemp oil and 20% blends of hemp oil with diesel

Emerging Trends in Mechanical Engineering, G. H. Patel College of Engineering and Technology, Gujarat, 1, 25-31, 2011

Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V

5.        

Combustion of agri-waste in fluidized bed boilers

ICTME-2011, TU, 1, 42-51, 2011

S. K. Mohapatra

6.        

Various tool designs in friction stir welding

International Conference on Emerging Trends in Mechanical Engineering 2011, Thapar University, Patiala, 382-388

Pritika Pathak, Rahul Chhibber, S.K. Mohapatra

7.        

Experimental study and numerical simulation on thermal analysis of tool and cutter grinding operation using FEM

ICTME-2011, TU, 1, 572-581, 2011

 

Mohapatra S.K., Dhull, V., Singla V.K.

 

8.        

Biodiesel production from used frying oil and properties as an alternate fuel

ICTME-2011, TU, 1, 768-772, 2011

 

Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V

9.        

Performance and emission evaluation of a CI engine fuelled with neem methyl ester and its blends

ICTME-2011, TU, 1, 773-781, 2011

Mohapatra, S.K., Ragit, S,C., Kundu

10.     

Effect of parameters on predicted stresses during Single Point Incremental Forming

International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Mechanical Engineering Department, Thapar University Patiala – 147004, Punjab

24 – 26 February, 2011

pp. 448 – 456

Anirban Bhattacharya,

Ajay Batish

11.     

Multi-response optimization using Grey analysis for nozzle effectiveness in a cylindrical grinding process

International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Mechanical Engineering Department, Thapar University Patiala – 147004, Punjab

24 – 26 February, 2011

pp. 563 – 571

Anirban Bhattacharya,

Ajay Batish,

Mandeep Singh

12.     

CFMEA: Concurrent Failure Mode and Effect Analysis

Proceedings of 2nd International Conference on Reliability, Safety, and Hazard-Risk-Based Technologies and Physics of Failure Methods, December 14-16, 2010, Mumbai pp. 399-405

Upadhyay, N., Deshpande, B. M., and Agrawal, V.P.

13.     

A decision making method for selection of finished process for a cylindrical surface

Proceedings of 2010 IEEE International conference on Industrial Engineering and Engineering Management (IEEM 2010), Taipa, Macao SAR, P.R. China,7th-10th Dec., pp. 38-42.

Varinder Singh, V.P. Agrawal, and P. Deb

14.     

An improved graph theoretic model for integrated manufacturing system

Proceedings of the Golden Jubilee National Conference on “Recent Advances in Manufacturing( RAM-2010), 19-21 July 2010, SVNIT, Surat, Gujrat, pp.151-156

Varinder Singh, V.P. Agrawal, and P. Deb

15.     

Fuzzy scale based TOPSIS-MADM method for selection of finishing processes

Proceedings of the Golden Jubilee National conference on “Recent Advances in Manufacturing(RAM-2010), 19-21 July 2010, SVNIT, Surat, Gujrat, pp.151-156

Varinder Singh, V.P. Agrawal, and P. Deb

16.     

Optimization of Regenerative gas turbine cycle using adaptive neuro fuzzy inference system

International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Mechanical Engineering Department, Thapar University Patiala – 147004, Punjab

24 – 26 February, 2011

Sumit Sharma

17.     

Study of machining characteristics of different materials using abrasive flow machining process: a review

National conference on Advances in manufacturing engineering, UIET, Chandigarh, , 20th - 21st May 2011, pp.230-235

Harmesh kansal

Sushil mittal

Vinod kumar

18.     

A study on applications                  of non-traditional machining processes-a review

National conference on Advances in manufacturing engineering, UIET, Chandigarh, , 20th - 21st May 2011,  pp 236-240

C.S.Kalra

Vinod kumar

 

19.     

A review on effect of   WEDM performance, recast layer and wire accuracy

National conference on Advances in manufacturing engineering, UIET, Chandigarh, , 20th - 21st May 2011,  pp 408-414

Anish kumar

Vinod kumar

Jatinder kumar

 

20.     

Effect of Machining                           Parameters on MRR during CNC WEDM of Pure Titanium

5th International Conference on Advances in Mechanical Engineering (ICAME-2011),S.V. National Institute of Technology, Surat Gujarat, India,pp 541-545, June 6-8, 2011.

Anish kumar

Vinod kumar

Jatinder kumar

21.     

Ultrasonic investigations of embedded and submerged components

International Conference on Theoretical and applied computational and experimental Mechanics ICTACEM 2010, IIT Khargarpur, December 26th-27th, 2010

Sandeep Sharma

Shruti Sharma

Dr. Abhijit Mukherjee

22.     

Health Monitoring of Post tensioning tendons using ultrasonic guided waves

First Middle East Conference on Smart Monitoring and Assessment & Rehabilitation of Civil Structures (SMAR) 2011, American University in Dubai, (AUD) & IISHM, February 9th-11th  2011

Sandeep Sharma

Shruti Sharma

23.     

Mechanisms for producing ultra-fine/ nano grained microstructure for austenitic stainless steels

International Conference on Emerging Trends in Mechanical Engineering (ICETME 2011), Mechanical Engineering Department, Thapar University, Patiala, 2011

Pankaj Sharma; Mrudul Rai; Tarun Nanda

24.     

An Analytical Finite Element Technique for Predicting Thrust Force and Torque in Drilling Process.

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala, Punjab, India. Feb., 24-26th, 2011, pp. 199-210

J. S. Saini, Ashish Mittal.

 

25.     

Design of ash transportation system

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala (Punjab), India, 24-26, Feb., 2011,pg .94-96

Satish Kumar

 

26.     

Design analysis of salisbury and banjo type axle housings

International Conference on  Emerging Trends in Mechanical Engineering, Thapar University, Patiala (Punjab), India, 24-26, Feb., 2011,pg .124-131

Tushar Chugh, Satish Kumar

 

27.     

Pressure drop evolution of pipe bend using CFD

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala (Punjab), India, 24-26, Feb., 2011,pg .690-694

Manu Aggarwal,Prateek Srivastava, Satish Kumar

28.     

Design of tussat thermal control system

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala (Punjab), India, 24-26, Feb., 2011,pg .782-789.

Sohil Batra, Satish Kumar

 

29.     

Energy saving in centrifugal pump with adjustable speed drive

 

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala (Punjab), India, 24-26, Feb., 2011,pg .907-910.

Prateek Srivastava,Sasank Shekhar; Satish Kumar

 

 

30.     

Automation technology in energy management

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala (Punjab), India, 24-26, Feb., 2011,pg .911-913.

Harish Giri,Rakesh Joshi, Satish Kumar

 

31.     

Dimensionless characteristics of radial flow centrifugal pump using variable frequency drive

Emerging Trends in Mechanical Engineering, Thapar University, Patiala (Punjab), India, 24-26, Feb., 2011,pg .919-923.

 

Aseem Mishra,Rakesh Kumar; Satish Kumar

 

 

32.     

Formability and Surface Finish Studies in Single Point Incremental Forming

Global Trends and Challenges in Design and Manufacturing,

3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University College of Engineering (A), Andhra University, Visakhapatnam – 530003, AP, India

December 13-15, 2010.

Volume 1, pp. 133 – 137.

Samarjit Singh,

A Bhattacharya,

NV Reddy

33.     

Grain Orientation during Single Point Incremental Forming

6th International Conference on Micro Manufacturing, Tokyo Denki University, Tokyo, Japan

March 7 – 10, 2011

pp. 35 – 39

Anirban Bhattacharya,

N V Reddy

34.     

Formability and surface finish studies in Single Point Incremental Forming

Proceedings of the 2011 International Manufacturing Science and Engineering Conference, Corvallis, Oregon, USA

June 13 – 17, 2011,

Paper code: MSEC2011-50284, pp. 1 – 7

A Bhattacharya, Samarjeet Singh,

K Maneesh,

N Venkata Reddy,

Jian Cao

35.     

A Study of Ductile and Brittle Fracture Behaviour of Bimetallic Welds at Cryogenic Temperatures for RPVs

International Conference on science and engineering, Rohtak, 2011

 

Amit Sarda,  Rahul Chhibber, B.K. Dutta

 

36.     

Underwater welding

International conference on emerging trends in mechanical engineering, 2011, Thapar University, Patiala, PAGE 72

Aashish Kaushal, Rahul Chhibber

37.     

Analysis of Creep in Functionally Graded Cylinder

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala, Punjab, India, Feb 24-26, 2011, Page 301-306.

Kishore Khanna, Harmandeep

38.     

Creep deformation and Stress Analysis in Rotating Disc of Composite Material

International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala, Punjab, India, Feb 24-26, 2011, Page 306-312.

Kishore Khanna, Devender Kumar, Barinder Singh

39.     

Design and Analysis of Air flow Control Mechanism of Automotive HVAC module using CAE tools

‘International Engg. Symposium’ 2011, Kumamoto University, Kumamoto, Japan

Daljeet Singh

40.     

Epoxy Layered Silicates Nanocomposites as Matrix In Fibre-reinforced Composites.

Advances in polymer science

and rubber technology at IIT,KHARAGPUR.

March 3-5,2011; Page 52

Sumit Mahajan, Bikramjit Sharma, Rahul Chibber, Rajeev Mehta

41.     

An experimental study on effects of thermal cycling on cast aluminium composites reinforced with silicon carbide and fly ash particles

International Conference on Emerging Trends in Mechanical Engineering at THAPAR UNIVERSITY, PATIALA.

Feb 24-26, 2011;Page 90

Sanjeev Kumar, Bikramjit Sharma, Dr.Rahul Chhibber

 

42.     

Minimum Transport Boudaries for Dense Phase Pneumatic Conveying of Powder           

Bulk Solids India, Mumbai, April 2011- (organized by foreign agencies- Vogel and Numberg)

S.S. Mallick, P.W. Wypych, R. Pan

43.     

Design of Energy Efficient Pneumatic Transport System using Fluidised Dense-Phase Mode

16th ISME Conference on “Mechanical Engineering for SUSTAINABLE DEVELOPMENT”, IIT Delhi, December 2010

S. S. Mallick

44.     

Analyzing signal to noise ratio optimization of physiological stress of Indian male workers in summer

Institute of Ergonomics, Stoke Rochford, Lincolnshire,UK, pp 270-277, April 11-13, 2011

Ajay Batish, R.P. Singh;T P Singh

45.     

Electric discharge machining of Al-10%Al2O3p as-cast composite

2nd International Conference on Production, Vol 1, 697-701, Dr. BR Ambedkar National Institute of Technology, Jalandhar, 2010

Ajay Batish, Sarabjeet Singh;Sanjeev Kumar

46.     

Electric discharge machining of aluminum based metal matrix composite

Global trends and Challenges in Design and manufacturing 3rd International and 24th All India manufacturing Technology, Design and Research (AIMTDR), Vishakhapatnam Vol 2, pp 1211-1216, 2010

Ajay Batish, Sarabjeet Singh;Sanjeev Kumar