Conference Papers (2013-14)

List of Conference Papers (2013-14)

S. No. Title of the paper Name of conference with venue, date and year, page nos. Name of the authors
1.      Effect of addition of fly ash on the rheological properties of bottom ash slurry at varying temperature Proc. International Conference on PGBSIA, November 28-31, 2013, Thapar Institute of Engineering & Technology, Patiala, pp 388-393. Kumar S., Mohapatra, S. K., and Gandhi B. K
2.  Performance and emission characteristics of a C.I. engine fuelled with different blends of biodiesel derived from waste mustard oil Proc. of Intl. conf. on Advances in Mechanical Engineering, AETAME, NOIDA, Dec 13-14, 2013. Bhardwaj V., Sharma S., Mohapatra, S. K., and Kundu, K
3.  Numerical Simulation of Solid liquid two phase Flow behaviour in Centrifugal slurry Pump International conference on Powder, Granule and Bulk Solids: Innovations and applications, Thapar Institute of Engineering & Technology, Patiala, India, 1,170-175. Kumar Satish, Gandhi, B.K., and Mohapatra, S. K. 
4.  Scallop Height of 5-axis Machining of Large Triangles with a Flat End Mill Annual International CAD conference, CAD’14, Hong Kong, 23to 26 June, 2014 Ravinder Kumar Duvedi,  Ajay Batish, Sanjeev Bedi,  Stephen Mann
5.  Analysis and Control of Semi Active Suspension System for a Bicycle vehicle model: A Bond Graph Approach Second International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM), IIT Indore, December 2013; pp. 168–173. Bera, T. K. and Singh, J.
6.  Bond graph aided performance analysis of antilock braking system for a bicycle vehicle model with camber angle and fork angle International Conference on Machines and Mechanisms (iNaCoMM 2013), IIT Roorkee, December 2013; pp 70–76. Bera, T. K. and Singh, A.
7.  A novel ball end magnetorheological finishing process ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, November 14-20, 2014, Montreal, Canada. Anant Kumar Singh, Sunil Jha, P.M. Pandey
8.  Effect of dispersion parameters on thermal conductivity of alumina and copper oxide nanofluid, “International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA 2013")”, Nov. 28-30, 2013. (Poster Presentation) Kundan L & Mallick SS
9.  Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM Proceedings of International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA), Mechanical Engineering Department, Thapar Institute of Engineering & Technology Patiala – 147004, Punjab November 28-30, 2013, pp. 370 – 376. Ajay Batish, Anirban Bhattacharya, Naveen Kumar
10.  Experimental Investigation of Magnetic field assisted Powder Mixed Electric Discharge Machining Proceedings of International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA), Mech. Engg Dept., TIET Patiala, November 28-30, 2013, pp. 344 – 350 Geeta Bhatt, Anirban Bhattacharya, Ajay Batish
11.  Taguchi method approach for determining the effect of process variables on properties of epoxy nanocomposites International conference on advanced polymeric materials, October 11-13, 2013, Kottayam, 95 Bikramjit Sharma, Rahul Chhibber, Rajeev Mehta
12.  Composite Cladding on Mild Steel Substrate using Microwave Hybrid Heating The International Conference on Smart Technologies for Mechanical Engineering (STME-2013), DTU, Delhi, 731-735. 2013 Dheeraj Gupta, Deepika Naudiyal
13.  Simulation of single slope solar still at different inclinations using CFD International conference of advance research innovation (ICARI- 2014) Venue: Institution of Engineers  Delhi State Center, Engineers Bavan 2, Bahadur Shah Zafar Marg, New Delhi            Date & Year: February 1st 2014,      Page no: 512-519. Amrik Singh, M. K. Mittal
14.  Tool Path Generation for Free Form Surfaces using B-Spline Surface International Conference on Research and Innovations in Mechanical Engineering, Guru Nanak Dev Engineering College, Ludhiana, Punjab, Oct., 24-26th, 2013 Simranpreet S. Randhawa, J. S. Saini
15.  Effect of Clay Reinforcement on the Properties of Epoxy based Polymer Matrix Nanocomposites Proceeding of the International Conference on Emerging Trends in Engineering and Management, November 8-9, 2013, MED, CIET, Jalvehra, Fatehgarh Sahib. Karanbir Singh and Tarun Nanda
16.  Effect of Alloying and Heat Treatment on the Properties of Super Martensitic Stainless Steels Proceeding of the International Conference on Emerging Trends in Engineering and Management, November 8-9, 2013, MED, CIET, Jalvehra, Fatehgarh Sahib. Surinder Singh and Tarun Nanda
17.  D-H Parameters Augmented with Dummy Frames for Serial Manipulators containing Spatial Links The 23rd IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN 2014), August 25-29, 2014, Edinburg, Scotland, UK (Accepted) Amanpreet Singh, Ashish Singla and Sanjeev Soni
18.  High Index Norm Approach: A Redundancy Resolution Scheme For Inverse Kinematics of Redundant Serial Manipulators Proceedings of 6th International IEEE Conference on Robotics and Mechatronics (ROBMECH-2013), pp. 40-45, Oct 30-31, 2013, Durban South Africa   Ashish Singla  
19.  Vibration Suppression of a Cart-Flexible Pole System Using a Hybrid Controller Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), pp. 375-382, Dec 18-20, 2013, IIT Roorkee, India Ashish Singla  
20.  An investigation into the stability and thermal conductivity of silver/water nanofluids International Conference on Powder, Granule and Bulk Solids: Innovations and Applications, November 28-30, 2013, Thapar Institute of Engineering & Technology, pp 271-276 Apoorva Singh, B.Pal and S.S. Mallick
21.  Evolution of Scale-Up Procedures for Dense-Phase Pneumatic Conveying of Powders   15thInternational Freight Pipeline Society Symposium 2014, Czech Association of Scientific and Technical Societies (CSVTS), Novotného lávka 5, Praha 1, Czech Republic, 24 June - 26 June 2014 P.W. Wypych, S.S. Mallick, R. Pan
22.  A Comparative study of  various methods for identification of isomorphism in kinematic chains Ist international and 16th National Conference on machines and mechanisms (iNaCoMM 2013) IIT Roorkee. pp 582-589 Rashmi Arora & S.P. Nigam